The ECOXGEAR ATRD660ST-2PK pairs the heavy-duty ATRD660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 1048mm 6.6dBi whip (1180mm overall) for long reach across flat, open terrain, and swap to the 530mm 2.3dBi whip (660mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable large barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRD660ST, and both whips carry the low-glare stealth matte finish.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• Two whips, one antenna: the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna
• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible

Specifications

• Model: ATRD660ST-2PK
• Antenna type: heavy-duty fibreglass radome, off-road, with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi (long whip) or 2.3dBi (short whip)
• Whip lengths: 1048mm (6.6dBi), 530mm (2.3dBi)
• Total length (including spring): 1180mm with the 6.6dBi whip, 660mm with the 2.3dBi whip
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD660ST antenna (6.6dBi whip, spring and 4.5m coax lead)
• 1 × 2.3dBi heavy-duty radome whip (530mm)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRDM660ST-2PK pairs the medium-duty ATRDM660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 880mm 6.6dBi whip (994mm overall) for long reach across flat, open terrain, and swap to the 500mm 2.3dBi whip (613mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable medium barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRDM660ST – a slimmer alternative to the heavy-duty ATRD pack – and both whips carry the low-glare stealth matte finish.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• Two whips, one antenna: the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna
• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Medium-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series
• Interchangeable medium barrel spring: matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible

Specifications

• Model: ATRDM660ST-2PK
• Antenna type: medium-duty fibreglass radome, overlanding and off-road, with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi (long whip) or 2.3dBi (short whip)
• Whip lengths: 880mm (6.6dBi), 500mm (2.3dBi)
• Total length (including spring): 994mm with the 6.6dBi whip, 613mm with the 2.3dBi whip
• Spring: interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRDM660ST antenna (6.6dBi whip, spring and 4.5m coax lead)
• 1 × 2.3dBi medium-duty radome whip (500mm)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRDM660ST is a medium-duty 6.6dBi UHF CB antenna for overlanding and 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. It is a slimmer alternative to the heavy-duty ATRD series, with a smaller Ø45mm spring and a shorter whip: the 880mm fibreglass radome whip sits on an interchangeable medium barrel-style stainless steel spring for a total length of 994mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• Medium-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series
• Interchangeable medium barrel spring: matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRDM230ST whip for hilly country or replace a damaged whip with a WPRDM660ST

Specifications

• Model: ATRDM660ST
• Antenna type: medium-duty fibreglass radome, overlanding and off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi
• Total length (including spring): 994mm
• Whip length: 880mm
• Spring: interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRDM660ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRDM230ST is a medium-duty 2.3dBi UHF CB antenna for overlanding and 4WD touring – a slimmer alternative to the heavy-duty ATRD series, with a smaller Ø45mm spring and a shorter whip. Its 500mm fibreglass radome whip sits on an interchangeable medium barrel-style stainless steel spring for a total length of 613mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Medium-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series
• Interchangeable medium barrel spring: matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the 6.6dBi WPRDM660ST whip for open country or replace a damaged whip with a WPRDM230ST

Specifications

• Model: ATRDM230ST
• Antenna type: medium-duty fibreglass radome, overlanding and off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 613mm
• Whip length: 500mm
• Spring: interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRDM230ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD660ST is a heavy-duty 6.6dBi UHF CB antenna for 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. The 1048mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 1180mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRD230ST whip for hilly country or replace a damaged whip with a WPRD660ST

Specifications

• Model: ATRD660ST
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi
• Total length (including spring): 1180mm
• Whip length: 1048mm
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD660ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD230ST is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work. Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the 6.6dBi WPRD660ST whip for open country or replace a damaged whip with a WPRD230ST

Specifications

• Model: ATRD230ST
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 660mm
• Whip length: 530mm
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD230ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD230 is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work, in a standard black finish (the ATRD230ST is the stealth matte version). Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a pre-terminated FME connector and PL259 adapter make fitting to a fixed-mount radio straightforward.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: elevated stainless steel barrel spring absorbs knocks and lets the whip flex through scrub
• 4.5m low-loss coax cable: enough length to run from a bull bar or bonnet mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so a damaged whip can be replaced without rewiring
• Black heat-shrink fibreglass finish: plain black wrap over the radome
• Weather cap and Allen key included

Specifications

• Model: ATRD230
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 660mm
• Whip length: 530mm
• Spring: interchangeable large barrel-style stainless steel, elevated base
• Ferrule: aluminium
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATRD230 antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATPA230 is a compact 2.3dBi UHF CB antenna on a strong magnetic base, so it can be put on any steel panel of a sedan, ute, 4WD or farm vehicle in seconds – no drilling, no brackets – and moved between vehicles just as easily. It stands 176mm tall, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous ground. The 3.3m low-loss coax lead is pre-terminated with an FME female connector, and both a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld are included. For best performance, mount it on the roof.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter) and the EXG500 handheld (FME/SMA adapter); both adapters included, radio sold separately.

Key Features

• Strong magnetic base: holds to any steel surface on the vehicle; the rooftop is recommended for the best signal
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Compact 176mm antenna: low enough for car parks and garages, and easy to stow when not in use
• 3.3m low-loss coax cable: enough length to route from the roof through a door seal to the radio
• Two adapters included: pre-terminated FME female connector with a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Portable: sets up almost anywhere, so it suits work utes, farm vehicles and any car you would rather not drill

Specifications

• Model: ATPA230
• Antenna type: portable, magnetic base
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length: 176mm
• Base: strong magnetic, for steel surfaces
• Cable: 3.3m low-loss coax
• Connector: FME female (pre-terminated); PL259 adapter and FME/SMA adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATPA230 magnetic-base antenna with 3.3m coax lead
• 1 × PL259 adapter
• 1 × FME/SMA adapter

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATEPL660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads, built around a slim elevated-feed parallel spring base – at Ø30mm it is the lower-profile of the two ECOXGEAR on-road kits (the ATEBR660-2PK uses a Ø45mm barrel spring). It comes with two interchangeable whips: a short 140mm 2.3dBi whip (390mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (930mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi short whip (140mm): lower gain with a rounder radiation pattern, the better choice in cities and built-up areas
• 6.6dBi long whip (680mm): higher gain with a longer, flatter radiation pattern for long, flat stretches of open road
• Easy whip changes: both whips share the one base, so you can swap to suit the trip instead of buying a second antenna
• Elevated-feed parallel spring base: slim Ø30mm stainless steel parallel spring lifts the feed point and lets the whip flex under car-park and carport clearances
• 4.5m low-loss coax cable: enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Black heat-shrink fibreglass whips: plain black wrap with a slim, low-key look

Specifications

• Model: ATEPL660-2PK
• Antenna type: on-road, elevated-feed parallel spring base with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi (short whip) or 6.6dBi (long whip)
• Whip lengths: 140mm (2.3dBi), 680mm (6.6dBi)
• Total length (including spring): 390mm with the 2.3dBi whip, 930mm with the 6.6dBi whip
• Spring: elevated stainless steel parallel spring, Ø30mm at widest point
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATEPL660 antenna base (elevated parallel spring with 4.5m coax lead)
• 1 × 2.3dBi whip (140mm)
• 1 × 6.6dBi whip (680mm)
• 1 × PL259 adapter

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATEBR660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads. One elevated-feed barrel spring base comes with two interchangeable whips: a short 140mm 2.3dBi whip (440mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (980mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi short whip (140mm): lower gain with a rounder radiation pattern, the better choice in cities and built-up areas
• 6.6dBi long whip (680mm): higher gain with a longer, flatter radiation pattern for long, flat stretches of open road
• Easy whip changes: both whips share the one base, so you can swap to suit the trip instead of buying a second antenna
• Elevated-feed barrel spring base: stainless steel barrel spring, Ø45mm at its widest, lifts the feed point and lets the whip flex under car-park and carport clearances
• 4.5m low-loss coax cable: enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Black heat-shrink fibreglass whips: plain black wrap with a slim, low-key look

Specifications

• Model: ATEBR660-2PK
• Antenna type: on-road, elevated-feed barrel spring base with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi (short whip) or 6.6dBi (long whip)
• Whip lengths: 140mm (2.3dBi), 680mm (6.6dBi)
• Total length (including spring): 440mm with the 2.3dBi whip, 980mm with the 6.6dBi whip
• Spring: elevated stainless steel barrel spring, Ø45mm at widest point
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATEBR660 antenna base (elevated barrel spring with 4.5m coax lead)
• 1 × 2.3dBi whip (140mm)
• 1 × 6.6dBi whip (680mm)
• 1 × PL259 adapter

Warranty: 12-month ECOXGEAR Australia warranty.