ECOXGEAR ATEBR660-2PK On-Road UHF Antenna Twin Whip Pack – Barrel Spring

The ECOXGEAR ATEBR660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads. One elevated-feed barrel spring base comes with two interchangeable whips: a short 140mm 2.3dBi whip (440mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (980mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi short whip (140mm): lower gain with a rounder radiation pattern, the better choice in cities and built-up areas
• 6.6dBi long whip (680mm): higher gain with a longer, flatter radiation pattern for long, flat stretches of open road
• Easy whip changes: both whips share the one base, so you can swap to suit the trip instead of buying a second antenna
• Elevated-feed barrel spring base: stainless steel barrel spring, Ø45mm at its widest, lifts the feed point and lets the whip flex under car-park and carport clearances
• 4.5m low-loss coax cable: enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Black heat-shrink fibreglass whips: plain black wrap with a slim, low-key look

Specifications

• Model: ATEBR660-2PK
• Antenna type: on-road, elevated-feed barrel spring base with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi (short whip) or 6.6dBi (long whip)
• Whip lengths: 140mm (2.3dBi), 680mm (6.6dBi)
• Total length (including spring): 440mm with the 2.3dBi whip, 980mm with the 6.6dBi whip
• Spring: elevated stainless steel barrel spring, Ø45mm at widest point
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATEBR660 antenna base (elevated barrel spring with 4.5m coax lead)
• 1 × 2.3dBi whip (140mm)
• 1 × 6.6dBi whip (680mm)
• 1 × PL259 adapter

Warranty: 12-month ECOXGEAR Australia warranty.

Part No.: ATEBR660-2PK