The ECOXTALK EXG50 twin pack is a simple, low-cost pair of 500mW UHF CB handhelds in a camouflage finish, sized for kids and adults alike. With all 80 Australian UHF CB channels, 50 CTCSS and 104 DCS codes, up to 3km of talk range* and 20-plus hours from a set of AAA batteries, they are an easy way to keep the family in touch around the campsite, on a walking track or at the park. Each radio has a large backlit channel display, a built-in LED torch, hands-free VOX and a micro-USB port that recharges NiMH AAA cells in the radio (batteries not included).

Key Features

• 500mW output, 80 UHF CB channels: full coverage of the Australian 476.4250–477.4125 MHz UHF CB band, including duplex on the repeater channels
• Up to 3km talk range*: suited to campsites, parks, beaches and short walks
• 20+ hours of operation: runs on 3 × AAA alkaline or NiMH rechargeable batteries per radio (not included)
• Micro-USB charging: recharges NiMH AAA cells inside the radio via the included cables
• Compact and light: 143mm tall and 124g with batteries – easy for small hands and pockets
• Large backlit channel LCD: with simple channel and volume controls and key lock
• 50 CTCSS and 104 DCS codes: plus dual watch, channel scan, auto squelch and 5 call tones
• Hands-free VOX: voice-activated transmit with three sensitivity levels
• Emergency call: hold the torch/lock key for five seconds to switch to channel 5 and send a call tone
• Built-in LED torch, low-battery alert and belt clip with large strap ring

Specifications

• Model: EXG50-2PKC (camouflage)
• RF output power: 500mW
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 3km*
• Squelch codes: 50 CTCSS, 104 DCS
• Battery: 3 × AAA alkaline or NiMH rechargeable per radio (not included)
• Operation time: 20+ hours
• Charging: micro-USB (charges NiMH cells in the radio)
• Dimensions: 143 × 49 × 39mm per radio (with belt clip)
• Weight: 124g per radio (with batteries)
• Colour: camouflage

What’s in the Box

• 2 × EXG50 UHF CB handheld radios (camouflage)
• 2 × belt clips
• 2 × micro-USB charging cables
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.

*Talk range varies with terrain, obstructions and conditions.

The ECOXGEAR ExtremeController is a 4-zone, 12V LEDCast lighting controller that runs SoundExtreme LED whips, strips and rock lights on a side-by-side, 4WD, golf cart or boat. It is the stand-alone hub for a LEDCast lighting setup when you do not have a SoundExtreme Elite soundbar or ECOXGEAR Marine radio with LEDCast built in. Four 3-pin outputs each drive a zone, the included long-range RF remote and the free SoundExtreme app give you control from the driver’s seat, and zones 3 and 4 can be wired to follow the vehicle’s brake, reverse and indicator signals. The IP66 housing is built for dust, spray and wash-downs.

Suits: LEDCast-enabled SoundExtreme lighting – ECOXGEAR Extreme 2ft and 4ft LED whips, ExtremeStrip interior, roof and golf cart underglow strips, and Extreme LED rock lights (all sold separately). Not for use with other brands’ LED products.

Key Features

• Four LEDCast zones: connect LEDCast-enabled strips, whips and rock lights, up to four zones at 5A each, and run them individually or all together
• Vehicle signal integration: zones 3 and 4 can be connected to the brake, reverse and turn signals so those lights change as you drive (optional; signal extension cables not included)
• Dual control: long-range RF remote in the box, plus the free SoundExtreme smartphone app over Bluetooth Low Energy
• Millions of colours and music sync: solid, fading, jumping and chasing modes, with music light sync to any EcoCast-enabled ECOXGEAR soundbar, radio or party speaker
• App control: run each zone separately or all at once, group several controllers, create custom colours, modify the factory defaults and save favourite colours, brightness and speed
• Five custom scenes: save five lighting presets that switch every zone at once
• Remote turn-on wire: blue wire connects to the ignition, a rocker switch or an auxiliary switched panel so the lights power up with the vehicle
• Two ways to mount: hook-and-loop self-fastener, or screw it down (screws not included)
• IP66 dirt and waterproof: industrial-grade sealed housing

Specifications

• Model: ExtremeController 4-zone LEDCast controller (SEI-SELEDZ4AU)
• LED outputs: 4 zones, 3-pin round female connectors, 5A maximum per zone
• Power input: 12V DC, 20A; 25A 32V blade fuse
• Remote turn-on input: 12–56V
• Vehicle signal inputs: brake, reverse, left and right turn (12V), zones 3 and 4 only
• Wireless: RF remote; Bluetooth 5.1 (BLE) for the SoundExtreme app; EcoCast music sync range up to 9.1m
• Water and dust rating: IP66
• Dimensions: 79mm W × 116mm H × 26mm D
• Weight: 0.2kg
• Operating temperature: -5°C to 35°C
• Cables: 2.4m SAE power cable (12 AWG), 3.0m remote turn-on extension cable

What’s in the Box

• 1 × ExtremeController 4-zone LEDCast controller
• 1 × RF remote control
• 1 × 2.4m SAE power cable
• 1 × 3.0m remote turn-on extension cable

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

The ECOXGEAR Extreme LED rock light 4 pack lights the wheel wells, underbody or footwells of a side-by-side, golf cart, 4WD, caravan or motorhome with four compact, IP67 waterproof RGB lights. Each has 24 addressable RGB LEDs in a slim 100 × 50 × 11.6mm UV-protected housing, delivering millions of colours, 20 party modes and 16 music sync modes, and mounts with built-in magnetic strips, the supplied self-drilling screws or zip ties. Over the single pack you get four lights, four 3.6m extension cables and three Y splitters, so you can run one light per controller zone or chain all four on a single zone. Controller not included: the rock lights must be driven by a SoundExtreme product with LEDCast technology – the ExtremeController, a SoundExtreme Elite soundbar or an ECOXGEAR Marine radio (sold separately) – which supplies the RF remote and app control.

Suits: SoundExtreme LEDCast products – the ECOXGEAR ExtremeController 4-zone LED controller, SoundExtreme Elite soundbars and ECOXGEAR Marine radios (sold separately). Not compatible with generic-brand LED controllers.

Key Features

• 24 addressable RGB LEDs per light: millions of colours with solid, fading, jumping, chasing and variable-brightness options
• 36 lighting modes: 20 pre-programmed party modes and 16 music sync modes, plus up to five saved scenes through the LEDCast controller or app
• LEDCast controlled: plugs into any LED output of the ExtremeController, a SoundExtreme Elite soundbar or an ECOXGEAR Marine radio; controller not included
• One zone or four: wire one light to each of the controller’s four outputs for independent control, or use the three included Y splitters to chain all four on a single zone
• IP67 waterproof and dustproof: sealed against rain, mud and dust
• UV-protected housing: resists fading and sun damage
• Three mounting options: two magnetic strips built into the back for any magnetic metal surface, self-drilling screws for a permanent mount, or zip ties through the side grooves
• 3.6m extension cables included: one 3-pin LED extension cable per light reaches from the controller to the wheel well
• Low power draw: 0.4A maximum at 12V per light

Specifications

• Model: Extreme LED rock light, 4 pack (SEI-RCK4AU)
• LEDs: 24 addressable RGB per light
• Lighting modes: 20 party modes, 16 music sync modes; millions of colours
• Water and dust rating: IP67
• Power: 12V; 0.4A maximum working current per light
• Connector: 3-pin; 4 × 3.6m (12ft) LED extension cables included; 3 × 3-pin Y cable splitters
• Mounting: built-in magnetic strips, self-drilling screws (82mm hole centres) or zip ties
• Dimensions: 100mm W × 50mm H × 11.6mm D per light
• Weight: 130g per light
• Operating temperature: -5°C to 35°C
• Controller: not included – requires a SoundExtreme product with LEDCast technology

What’s in the Box

• 4 × Extreme LED rock lights
• 4 × 3.6m 3-pin LED extension cables
• 3 × 3-pin Y cable splitters
• 8 × self-drilling mounting screws
• 8 × zip ties

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

The ECOXTALK EXG510S in blaze orange is a 5-watt, long-range UHF CB handheld for 4WD touring, remote worksites, boating and emergency kits, with a high-visibility colour that is easy to find in a glovebox, tool bag or on the ground. It is IP67 waterproof and dustproof, runs for up to 25 hours on its 2500mAh lithium-ion battery and charges by USB-C either directly or in the included desktop cradle. A one-touch REPLAY key plays back received transmissions so nothing is missed, a live RSSI display shows signal strength and squelch level, and an on-screen UHF channel use guide shows which channels are set aside for emergency, highway, off-road, caravan, repeater and general use. Switchable 5W/3W/1W output, hands-free VOX and a removable antenna that accepts the ECOXGEAR ATPA230 external antenna round it out, with an earpiece microphone in the box.

Key Features

• 5W / 3W / 1W switchable output, 80 UHF CB channels: up to 17km talk range* at full power; drop to 3W or 1W to save battery
• IP67 waterproof and dustproof: rugged housing for rain, dust and wash-downs
• One-touch REPLAY: dedicated key plays back received transmissions
• Live RSSI active display: received signal strength and squelch level at a glance
• Up to 25 hours of operation: 2500mAh lithium-ion battery pack, included
• USB-C charging: direct to the radio or via the included single charging cradle; AC/USB adapter and cable supplied
• On-screen UHF channel use guide: shows the emergency, highway, off-road, caravan, repeater and general-use channels
• 7-colour dot matrix LCD: adjustable display and keypad brightness; rotary on/off and volume control
• Removable flexible antenna: swap for an ECOXGEAR ATPA230 external antenna; 2-pin K-type accessory socket with earpiece microphone included
• Hands-free VOX: plus 50 CTCSS and 104 DCS codes, channel scan with four scan modes, dual channel watch, one-touch priority channel, call tone, roger beep, key lock, auto battery save and low-battery alert

Specifications

• Model: EXG510SORG (blaze orange)
• RF output power: 5W / 3W / 1W switchable
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 17km*
• Ingress rating: IP67
• Display: 7-colour dot matrix LCD with live RSSI; adjustable display and keypad brightness
• Squelch codes: 50 CTCSS, 104 DCS
• Battery: 2500mAh lithium-ion pack (included)
• Operation time: up to 25 hours
• Charging: 5V USB-C, direct or via single charging cradle
• Antenna: removable flexible (ATPA230 compatible)
• Accessory port: 2-pin K-type socket (microphone/earpiece)
• Dimensions: 270 × 60 × 53mm
• Weight: 300g
• Colour: blaze orange

What’s in the Box

• 1 × EXG510SORG UHF CB handheld radio
• 1 × lithium-ion battery pack
• 1 × removable antenna
• 1 × belt clip
• 1 × single charging cradle
• 1 × earpiece microphone
• 1 × AC/USB adapter
• 1 × USB charging cable
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.

*Talk range varies with terrain, obstructions and conditions.

The ECOXGEAR Defender 12V in white is the 100-watt, IP67 floating Defender party speaker with one addition for 4WDs, boats, caravans and camps: a regulated 12V DC charging input, so it charges from a vehicle or auxiliary battery through the supplied SAE-DC cable and keeps playing while it does. A 100W Texas Instruments amplifier drives a 6" × 9" polypropylene carbon main driver and a 1.7" titanium tweeter, the battery runs for 25+ hours*, and Bluetooth 5.1, EcoCast linking, a ¼" microphone input for PA use and app-controlled LED lighting are all on board.

Key Features

• 12V DC charging: regulated 12V DC / 2A input charges the speaker from a vehicle or auxiliary battery through the included SAE-DC adaptor cable, and it plays while charging (optional cigarette-lighter lead or SoundExtreme 2.4m cable available separately)
• 100W peak, 2-way speaker system: 6" × 9" full-range polypropylene carbon main driver and 1.7" titanium tweeter, driven by a 100W dynamic Texas Instruments amplifier
• 3 digital EQ settings: indoor, outdoor and favourite modes to suit the space
• IP67 waterproof and dustproof, and it floats: withstands full submersion to 1m for 30 minutes
• 25+ hours of playtime*: built-in 14.8V 79.96Wh (5400mAh) lithium-ion battery gives 6+ hours even at maximum volume, and the speaker plays while charging
• Bluetooth 5.1 with hands-free calling: streams from up to 30m away, pairs two devices at once, and the built-in microphone handles speakerphone calls and Siri or Google Assistant
• EcoCast: link up to 100 EcoCast-enabled ECOXGEAR and SoundExtreme speakers so everyone hears the same track (up to 9m between speakers)
• ¼" microphone input: plug in a dynamic microphone (sold separately) for PA use, with 3 EQ effects for your voice
• Addressable LED lights and torch: party lighting and a flashlight, controlled from the backlit keypad or the free SoundExtreme app
• 3.5mm aux input and USB-C charge-out: play wired sources, and top up a phone from the 5V/2.1A USB-C port

Specifications

• Model: Defender 12V (GDI-EXDFNR0812VAU)
• Colour: White
• Output power: 100W peak
• Speakers: 2-way – 6" × 9" full-range polypropylene carbon main driver, 1.7" titanium tweeter
• EQ: 3 digital settings (indoor, outdoor, favourite)
• Water & dust rating: IP67 – submersible to 1m for 30 minutes; floats
• Wireless: Bluetooth 5.1 (up to 30m, two devices at once), EcoCast (up to 100 speakers), SoundExtreme app
• Battery: built-in 14.8V 79.96Wh (5400mAh) lithium-ion
• Playtime: 25+ hours*; 6+ hours at maximum volume
• Charging: AC-DC adapter (100–240V input) or regulated 12V DC / 2A input via the SAE-DC adaptor cable; plays while charging
• Inputs & outputs: 3.5mm aux in, ¼" (6.35mm) microphone in, USB-C charge out (5V, 2.1A)
• Lighting: addressable LED lights and torch
• Dimensions: 391mm W × 244mm H × 171mm D
• Weight: 4.58kg

What’s in the Box

• 1 × Defender 12V speaker
• 1 × AC-DC power adapter
• 1 × SAE-DC adaptor cable
• 1 × manual

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.

*Playtime varies with volume, lighting and content.

The ECOXGEAR Extreme LED rock light is a compact, IP67 waterproof RGB light for the wheel wells, underbody or footwells of a side-by-side, golf cart, 4WD, caravan or motorhome. Twenty-four addressable RGB LEDs in a slim 100 × 50 × 11.6mm UV-protected housing deliver millions of colours, 20 party modes and 16 music sync modes, and it mounts with the built-in magnetic strips, the supplied self-drilling screws or zip ties. Controller not included: the rock light must be driven by a SoundExtreme product with LEDCast technology – the ExtremeController, a SoundExtreme Elite soundbar or an ECOXGEAR Marine radio (sold separately) – which supplies the RF remote and app control.

Suits: SoundExtreme LEDCast products – the ECOXGEAR ExtremeController 4-zone LED controller, SoundExtreme Elite soundbars and ECOXGEAR Marine radios (sold separately). Not compatible with generic-brand LED controllers.

Key Features

• 24 addressable RGB LEDs per light: millions of colours with solid, fading, jumping, chasing and variable-brightness options
• 36 lighting modes: 20 pre-programmed party modes and 16 music sync modes, plus up to five saved scenes through the LEDCast controller or app
• LEDCast controlled: plugs into any LED output of the ExtremeController, a SoundExtreme Elite soundbar or an ECOXGEAR Marine radio; controller not included
• IP67 waterproof and dustproof: sealed against rain, mud and dust
• UV-protected housing: resists fading and sun damage
• Three mounting options: two magnetic strips built into the back for any magnetic metal surface, self-drilling screws for a permanent mount, or zip ties through the side grooves
• 3.6m extension cable included: a 3-pin LED extension cable reaches from the controller to the wheel well
• Low power draw: 0.4A maximum at 12V per light

Specifications

• Model: Extreme LED rock light, single pack (SEI-RCK1AU)
• LEDs: 24 addressable RGB per light
• Lighting modes: 20 party modes, 16 music sync modes; millions of colours
• Water and dust rating: IP67
• Power: 12V; 0.4A maximum working current per light
• Connector: 3-pin; 1 × 3.6m (12ft) LED extension cable included
• Mounting: built-in magnetic strips, self-drilling screws (82mm hole centres) or zip ties
• Dimensions: 100mm W × 50mm H × 11.6mm D per light
• Weight: 130g per light
• Operating temperature: -5°C to 35°C
• Controller: not included – requires a SoundExtreme product with LEDCast technology

What’s in the Box

• 1 × Extreme LED rock light
• 1 × 3.6m 3-pin LED extension cable
• 2 × self-drilling mounting screws
• 2 × zip ties

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

The ECOXGEAR ATRD660ST-2PK pairs the heavy-duty ATRD660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 1048mm 6.6dBi whip (1180mm overall) for long reach across flat, open terrain, and swap to the 530mm 2.3dBi whip (660mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable large barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRD660ST, and both whips carry the low-glare stealth matte finish.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• Two whips, one antenna: the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna
• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible

Specifications

• Model: ATRD660ST-2PK
• Antenna type: heavy-duty fibreglass radome, off-road, with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi (long whip) or 2.3dBi (short whip)
• Whip lengths: 1048mm (6.6dBi), 530mm (2.3dBi)
• Total length (including spring): 1180mm with the 6.6dBi whip, 660mm with the 2.3dBi whip
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD660ST antenna (6.6dBi whip, spring and 4.5m coax lead)
• 1 × 2.3dBi heavy-duty radome whip (530mm)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRDM660ST-2PK pairs the medium-duty ATRDM660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 880mm 6.6dBi whip (994mm overall) for long reach across flat, open terrain, and swap to the 500mm 2.3dBi whip (613mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable medium barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRDM660ST – a slimmer alternative to the heavy-duty ATRD pack – and both whips carry the low-glare stealth matte finish.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• Two whips, one antenna: the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna
• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Medium-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series
• Interchangeable medium barrel spring: matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible

Specifications

• Model: ATRDM660ST-2PK
• Antenna type: medium-duty fibreglass radome, overlanding and off-road, with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi (long whip) or 2.3dBi (short whip)
• Whip lengths: 880mm (6.6dBi), 500mm (2.3dBi)
• Total length (including spring): 994mm with the 6.6dBi whip, 613mm with the 2.3dBi whip
• Spring: interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRDM660ST antenna (6.6dBi whip, spring and 4.5m coax lead)
• 1 × 2.3dBi medium-duty radome whip (500mm)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR Extreme Phat Stick is a heavy-duty, one-foot (30cm) LED whip that gives off-road vehicles high-impact, 360-degree visibility and style in a short, stubby form. It is the whip only – no controller is supplied – and, like ECOXGEAR’s other Extreme LED whips, it is designed to run from a SoundExtreme LEDCast product such as the ExtremeController, a SoundExtreme Elite soundbar or an ECOXGEAR Marine radio (sold separately).

Key Features

• Heavy-duty 1ft LED whip: short, rugged light rod built for off-road use
• 360-degree visibility: high-impact light output all the way around the whip for visibility and style
• Built for off-road vehicles: heavy-duty construction for rough tracks and trails
• Whip only: no controller included – intended for use with a SoundExtreme LEDCast controller, soundbar or radio, sold separately

Specifications

• Model: Extreme Phat Stick 1ft LED whip (SEI-SEWHP1AU)
• Length: 1ft (30cm)
• Type: heavy-duty LED whip, 360-degree light output
• Controller: not included

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

Genuine replacement fibreglass whip for the ECOXGEAR ATRD660ST heavy-duty radome UHF CB antenna. The 1048mm, 6.6dBi whip threads onto the ATRD series spring base, so you can replace a damaged whip or swap between the 2.3dBi and 6.6dBi whips (see WPRD230ST) to suit the terrain – 6.6dBi gives a longer, flatter radiation pattern for extra reach across flat, open country. The stealth matte finish keeps reflections down when driving at night.

Suits: ECOXGEAR ATRD230ST and ATRD660ST heavy-duty radome antennas (spring base, coax and connector sold separately).

Key Features

• Genuine ECOXGEAR part: the same whip fitted to the ATRD660ST antenna
• 6.6dBi gain: higher-gain, longer and flatter pattern suited to flat, open terrain
• Fibreglass radome construction: protects the antenna element from the elements
• Stealth matte finish: low sheen for diffused reflectivity under night lighting
• UHF CB 477MHz, ground-independent design
• Whip only: reuse your existing ATRD spring base and coax

Specifications

• Model: WPRD660ST
• Whip length: 1048mm
• Gain: 6.6dBi
• Frequency: UHF CB 477MHz
• Construction: heavy-duty fibreglass radome
• Finish: stealth matte black

What’s in the Box

• 1 × WPRD660ST antenna whip

Warranty: 12-month ECOXGEAR Australia warranty.

Genuine replacement fibreglass whip for the ECOXGEAR ATRDM660ST medium-duty radome UHF CB antenna. The 880mm, 6.6dBi whip threads onto the ATRDM series spring base, so you can replace a damaged whip or swap between the 2.3dBi and 6.6dBi whips (see WPRDM230ST) to suit the terrain – 6.6dBi gives a longer, flatter radiation pattern for extra reach across flat, open country. The stealth matte finish keeps reflections down when driving at night.

Suits: ECOXGEAR ATRDM230ST and ATRDM660ST medium-duty radome antennas (spring base, coax and connector sold separately).

Key Features

• Genuine ECOXGEAR part: the same whip fitted to the ATRDM660ST antenna
• 6.6dBi gain: higher-gain, longer and flatter pattern suited to flat, open terrain
• Fibreglass radome construction: protects the antenna element from the elements
• Stealth matte finish: low sheen for diffused reflectivity under night lighting
• UHF CB 477MHz, ground-independent design
• Whip only: reuse your existing ATRDM spring base and coax

Specifications

• Model: WPRDM660ST
• Whip length: 880mm
• Gain: 6.6dBi
• Frequency: UHF CB 477MHz
• Construction: medium-duty fibreglass radome
• Finish: stealth matte black

What’s in the Box

• 1 × WPRDM660ST antenna whip

Warranty: 12-month ECOXGEAR Australia warranty.

Genuine replacement fibreglass whip for the ECOXGEAR ATRD230ST heavy-duty radome UHF CB antenna. The 530mm, 2.3dBi whip threads onto the ATRD series spring base, so you can replace a damaged whip or swap between the 2.3dBi and 6.6dBi whips (see WPRD660ST) to suit the terrain – 2.3dBi gives a rounder radiation pattern that holds signal better on hilly and mountainous off-road tracks. The stealth matte finish keeps reflections down when driving at night.

Suits: ECOXGEAR ATRD230ST and ATRD660ST heavy-duty radome antennas (spring base, coax and connector sold separately).

Key Features

• Genuine ECOXGEAR part: the same whip fitted to the ATRD230ST antenna
• 2.3dBi gain: lower-gain, rounded pattern suited to hilly and mountainous terrain
• Fibreglass radome construction: protects the antenna element from the elements
• Stealth matte finish: low sheen for diffused reflectivity under night lighting
• UHF CB 477MHz, ground-independent design
• Whip only: reuse your existing ATRD spring base and coax

Specifications

• Model: WPRD230ST
• Whip length: 530mm
• Gain: 2.3dBi
• Frequency: UHF CB 477MHz
• Construction: heavy-duty fibreglass radome
• Finish: stealth matte black

What’s in the Box

• 1 × WPRD230ST antenna whip

Warranty: 12-month ECOXGEAR Australia warranty.

Genuine replacement fibreglass whip for the ECOXGEAR ATRDM230ST medium-duty radome UHF CB antenna. The 500mm, 2.3dBi whip threads onto the ATRDM series spring base, so you can replace a damaged whip or swap between the 2.3dBi and 6.6dBi whips (see WPRDM660ST) to suit the terrain – 2.3dBi gives a rounder radiation pattern that holds signal better on hilly and mountainous off-road tracks. The stealth matte finish keeps reflections down when driving at night.

Suits: ECOXGEAR ATRDM230ST and ATRDM660ST medium-duty radome antennas (spring base, coax and connector sold separately).

Key Features

• Genuine ECOXGEAR part: the same whip fitted to the ATRDM230ST antenna
• 2.3dBi gain: lower-gain, rounded pattern suited to hilly and mountainous terrain
• Fibreglass radome construction: protects the antenna element from the elements
• Stealth matte finish: low sheen for diffused reflectivity under night lighting
• UHF CB 477MHz, ground-independent design
• Whip only: reuse your existing ATRDM spring base and coax

Specifications

• Model: WPRDM230ST
• Whip length: 500mm
• Gain: 2.3dBi
• Frequency: UHF CB 477MHz
• Construction: medium-duty fibreglass radome
• Finish: stealth matte black

What’s in the Box

• 1 × WPRDM230ST antenna whip

Warranty: 12-month ECOXGEAR Australia warranty.

The EXG1000 Value Pack bundles the ECOXTALK EXG1000 5-watt super-compact fixed mount UHF CB radio with the ECOXGEAR ATEPL660-2PK on-road antenna kit and a black Z-bracket mount – everything a daily-driven 4WD, ute or caravan tow vehicle needs to get on air. The antenna kit’s elevated-feed parallel spring base takes two interchangeable whips: a short 2.3dBi whip (390mm overall) with a rounded pattern for towns and built-up areas, and a 6.6dBi whip (930mm overall) with a longer, flatter pattern for open highway driving. The radio’s 109 × 27 × 123mm chassis fits where full-size units will not, with a 7-colour high-contrast VA LCD, noise reduction, a USB-C 5V/9V charging port for your phone and up to 17km of talk range* across all 80 channels.

Key Features

• Radio, antenna kit and mount in one pack: EXG1000 radio and mounting kit with the ATEPL660-2PK antenna, two whips, 4.5m coax, PL-259 adapter and a black Z bracket
• ATEPL660-2PK on-road antenna: elevated-feed parallel spring base (Ø30mm) with interchangeable 2.3dBi and 6.6dBi whips; UHF CB 477MHz, ground independent
• Two whips for two conditions: 2.3dBi short whip (140mm, 390mm overall) for towns and built-up areas; 6.6dBi long whip (680mm, 930mm overall) for long, flat highway runs
• 5W output, 80 UHF CB channels: 476.4250–477.4125 MHz band with duplex (repeater) channels and up to 17km talk range*
• Super-compact chassis: 109mm W × 27mm H × 123mm D on the included quick-release mounting bracket
• 7-colour high-contrast VA LCD: extra-wide display with backlight dimmer and 5-step brightness, readable day or night
• USB-C charging port: 5V/9V output to charge phones and other devices on the go
• Noise-reduction circuit: clear audio through the speakers in both the lightweight microphone and the base
• Scanning and recall: open and group scan with priority watch, dual watch, busy channel lockout, monitor mode, one-touch emergency (05/35) and priority channel recall
• 9 squelch levels, 50 CTCSS and 104 DCS codes: plus 5 call tones, roger beep, key beep and hi/lo voltage alert

Specifications

• Model: EXG1000-VPK
• Radio: EXG1000 super-compact fixed mount UHF CB
• RF output power: 5.0W
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 17km*
• Display: extra-wide 7-colour high-contrast VA LCD, 5-step brightness with dimmer
• Squelch: 9 levels; 50 CTCSS and 104 DCS codes
• Power: 12V DC, fused power lead included
• USB-C port: 5V / 9V charging output
• Antenna: ATEPL660-2PK elevated-feed parallel spring base with twin whips, UHF CB 477MHz ground independent
• Whips: 2.3dBi – 140mm whip, 390mm overall; 6.6dBi – 680mm whip, 930mm overall
• Spring barrel: Ø30mm
• Antenna cable: 4.5m low-loss coax, FME female with PL-259 adapter
• Mount: black Z bracket
• Antenna connection: external antenna socket (SO-239, for PL-259 plug)
• Accessory port: 3.5mm audio jack
• Chassis dimensions: 109mm W × 27mm H × 123mm D
• Weight: 394g (with bracket)
• Microphone: 94 × 64 × 37mm (with hook), 192g

What’s in the Box

• 1 × EXG1000 UHF CB radio
• 1 × quick-release mounting bracket
• 1 × microphone hanger
• 1 × 12V DC power lead with fuse
• Mounting hardware
• 1 × ATEPL660 antenna base with 4.5m coax and PL-259 adapter
• 1 × 2.3dBi whip
• 1 × 6.6dBi whip
• 1 × black Z bracket
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 5 years with free online product registration.

*Talk range varies with antenna, terrain, obstructions and conditions.

The ECOXTALK EXG1000 is a 5-watt, 80-channel UHF CB radio in a super-compact 109 × 27 × 123mm chassis that fits where a full-size unit will not – ideal for 4WDs, campervans and motorhomes. An extra-wide, high-contrast VA LCD with seven backlight colours and a dimmer stays readable day or night, noise-reduction circuitry keeps audio clear through the speakers in both the lightweight microphone and the base, and a USB-C port (5V/9V) on the radio charges your phone or other devices on the go. Open and group scan with priority watch, one-touch emergency and priority channel recall and duplex repeater channels are all on board, for up to 17km of talk range* with a suitable antenna (sold separately).

Key Features

• 5W output, 80 UHF CB channels: 476.4250–477.4125 MHz band with duplex (repeater) channels and up to 17km talk range* with a suitable antenna
• Super-compact chassis: 109mm W × 27mm H × 123mm D on the included quick-release mounting bracket
• 7-colour high-contrast VA LCD: extra-wide display with backlight dimmer and 5-step brightness, readable day or night
• USB-C charging port: 5V/9V output to charge phones and other devices on the go
• Noise-reduction circuit: clear audio through the speakers in both the lightweight microphone and the base
• Scanning: open scan and group scan with priority watch, dual watch, busy channel lockout and monitor mode
• One-touch emergency channel (05/35) and priority channel recall
• 9 squelch levels, 50 CTCSS and 104 DCS codes
• 5 call tones, roger beep, key beep and hi/lo voltage alert
• Antenna not included: sold separately – see the EXG1000 Value Pack for a radio-and-antenna bundle

Specifications

• Model: EXG1000
• Radio type: fixed mount UHF CB
• RF output power: 5.0W
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 17km*
• Display: extra-wide 7-colour high-contrast VA LCD, 5-step brightness with dimmer
• Squelch: 9 levels; 50 CTCSS and 104 DCS codes
• Power: 12V DC, fused power lead included
• USB-C port: 5V / 9V charging output
• Antenna connection: external antenna socket (SO-239, for PL-259 plug)
• Accessory port: 3.5mm audio jack
• Chassis dimensions: 109mm W × 27mm H × 123mm D
• Weight: 394g (with bracket)
• Microphone: 94 × 64 × 37mm (with hook), 192g

What’s in the Box

• 1 × EXG1000 UHF CB radio
• 1 × quick-release mounting bracket
• 1 × microphone hanger
• 1 × 12V DC power lead with fuse
• Mounting hardware
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 5 years with free online product registration.

*Talk range varies with antenna, terrain, obstructions and conditions.

The EXG3000 Touring Pack bundles the ECOXTALK EXG3000 5-watt fixed mount UHF CB radio with the ECOXGEAR ATEBR660-2PK on-road antenna kit and a black Z-bracket mount, so a touring 4WD, caravan tow vehicle or motorhome is on air straight out of the box. The antenna kit’s elevated-feed barrel spring base takes two interchangeable whips: a short 2.3dBi whip (440mm overall) with a rounded pattern for towns and built-up areas, and a 6.6dBi whip (980mm overall) with a longer, flatter pattern for the open highway. The radio itself tucks a super-compact base behind the dash and puts an extra-large 2.17" 7-colour display, live RSSI and dedicated channel and volume keys on the remote speaker mic, for up to 17km of talk range* across all 80 channels.

Key Features

• Radio, antenna kit and mount in one pack: EXG3000 radio, LCD speaker mic and mounting kit with the ATEBR660-2PK antenna, two whips, 4.5m coax, PL-259 adapter and a black Z bracket
• ATEBR660-2PK on-road antenna: elevated-feed barrel spring base (Ø45mm) with interchangeable 2.3dBi and 6.6dBi whips; UHF CB 477MHz, ground independent
• Two whips for two conditions: 2.3dBi short whip (140mm, 440mm overall) for towns and built-up areas; 6.6dBi long whip (680mm, 980mm overall) for long, flat highway runs
• 5W output, 80 UHF CB channels: 476.4250–477.4125 MHz band with duplex (repeater) channels and up to 17km talk range*
• Super-compact base: 106.5mm W × 29.5mm H × 120mm D chassis mounts out of sight on the included quick-release bracket
• Remote LCD speaker microphone: extra-large 2.17" 7-colour dot matrix display, backlit keypad, dedicated channel and volume keys and a heavy-duty cord; magnetic mic hanger and 2m extension cable included
• Live RSSI active display: shows received signal strength and squelch level; 9 squelch levels to suit conditions
• Noise-reduction circuit: clear audio through the speakers in both the microphone and the base
• Scanning and recall: open and group scan with priority watch, dual watch, busy channel lockout, monitor mode, one-touch emergency (05/35) and priority channel recall
• 50 CTCSS and 104 DCS codes: plus 5 call tones, roger beep, key beep, display dimmer with 5-step brightness and hi/lo voltage alert

Specifications

• Model: EXG3000-TPK
• Radio: EXG3000 fixed mount UHF CB with remote LCD speaker microphone
• RF output power: 5.0W
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 17km*
• Display: 2.17" 7-colour dot matrix LCD on the microphone, live RSSI, 5-step brightness with dimmer
• Squelch: 9 levels; 50 CTCSS and 104 DCS codes
• Power: 12V DC (10A input rating), fused power lead included
• Antenna: ATEBR660-2PK elevated-feed barrel spring base with twin whips, UHF CB 477MHz ground independent
• Whips: 2.3dBi – 140mm whip, 440mm overall; 6.6dBi – 680mm whip, 980mm overall
• Spring barrel: Ø45mm
• Antenna cable: 4.5m low-loss coax, FME female with PL-259 adapter
• Mount: black Z bracket
• Antenna connection: external antenna socket (SO-239, for PL-259 plug)
• Accessory port: 3.5mm audio jack
• Base dimensions: 106.5mm W × 29.5mm H × 120mm D
• Base weight: 364g (with bracket)
• Microphone: 107 × 64 × 37mm (with hook), 254g

What’s in the Box

• 1 × EXG3000 UHF CB radio with LCD speaker microphone
• 1 × quick-release mounting bracket
• 1 × magnetic microphone hanger
• 1 × 12V DC power lead with fuse
• 1 × 2m microphone extension cable
• 1 × extension cable adapter
• Mounting hardware
• 1 × ATEBR660 antenna base with 4.5m coax and PL-259 adapter
• 1 × 2.3dBi whip
• 1 × 6.6dBi whip
• 1 × black Z bracket
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 5 years with free online product registration.

*Talk range varies with antenna, terrain, obstructions and conditions.

The ECOXGEAR ATRDM660ST is a medium-duty 6.6dBi UHF CB antenna for overlanding and 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. It is a slimmer alternative to the heavy-duty ATRD series, with a smaller Ø45mm spring and a shorter whip: the 880mm fibreglass radome whip sits on an interchangeable medium barrel-style stainless steel spring for a total length of 994mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• Medium-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series
• Interchangeable medium barrel spring: matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRDM230ST whip for hilly country or replace a damaged whip with a WPRDM660ST

Specifications

• Model: ATRDM660ST
• Antenna type: medium-duty fibreglass radome, overlanding and off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi
• Total length (including spring): 994mm
• Whip length: 880mm
• Spring: interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRDM660ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD660ST is a heavy-duty 6.6dBi UHF CB antenna for 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. The 1048mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 1180mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 6.6dBi gain for open country: higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRD230ST whip for hilly country or replace a damaged whip with a WPRD660ST

Specifications

• Model: ATRD660ST
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 6.6dBi
• Total length (including spring): 1180mm
• Whip length: 1048mm
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD660ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD230ST is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work. Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub
• Stealth matte finish: low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights
• 4.5m low-loss coax cable: TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• 30mm mount thread: longer thread for a more secure fit in most bull bar and bonnet mounting brackets
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so you can fit the 6.6dBi WPRD660ST whip for open country or replace a damaged whip with a WPRD230ST

Specifications

• Model: ATRD230ST
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 660mm
• Whip length: 530mm
• Spring: interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point
• Ferrule: aluminium
• Cable: 4.5m low-loss coax, TPE jacket
• Connector: FME female (pre-terminated), PL259 adapter included
• Mount thread length: 30mm
• Finish: stealth matte black

What’s in the Box

• 1 × ATRD230ST antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × embossed weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATRD230 is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work, in a standard black finish (the ATRD230ST is the stealth matte version). Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a pre-terminated FME connector and PL259 adapter make fitting to a fixed-mount radio straightforward.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: elevated stainless steel barrel spring absorbs knocks and lets the whip flex through scrub
• 4.5m low-loss coax cable: enough length to run from a bull bar or bonnet mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so a damaged whip can be replaced without rewiring
• Black heat-shrink fibreglass finish: plain black wrap over the radome
• Weather cap and Allen key included

Specifications

• Model: ATRD230
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 660mm
• Whip length: 530mm
• Spring: interchangeable large barrel-style stainless steel, elevated base
• Ferrule: aluminium
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATRD230 antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATPA230 is a compact 2.3dBi UHF CB antenna on a strong magnetic base, so it can be put on any steel panel of a sedan, ute, 4WD or farm vehicle in seconds – no drilling, no brackets – and moved between vehicles just as easily. It stands 176mm tall, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous ground. The 3.3m low-loss coax lead is pre-terminated with an FME female connector, and both a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld are included. For best performance, mount it on the roof.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter) and the EXG500 handheld (FME/SMA adapter); both adapters included, radio sold separately.

Key Features

• Strong magnetic base: holds to any steel surface on the vehicle; the rooftop is recommended for the best signal
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Compact 176mm antenna: low enough for car parks and garages, and easy to stow when not in use
• 3.3m low-loss coax cable: enough length to route from the roof through a door seal to the radio
• Two adapters included: pre-terminated FME female connector with a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Portable: sets up almost anywhere, so it suits work utes, farm vehicles and any car you would rather not drill

Specifications

• Model: ATPA230
• Antenna type: portable, magnetic base
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length: 176mm
• Base: strong magnetic, for steel surfaces
• Cable: 3.3m low-loss coax
• Connector: FME female (pre-terminated); PL259 adapter and FME/SMA adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATPA230 magnetic-base antenna with 3.3m coax lead
• 1 × PL259 adapter
• 1 × FME/SMA adapter

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATEPL660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads, built around a slim elevated-feed parallel spring base – at Ø30mm it is the lower-profile of the two ECOXGEAR on-road kits (the ATEBR660-2PK uses a Ø45mm barrel spring). It comes with two interchangeable whips: a short 140mm 2.3dBi whip (390mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (930mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi short whip (140mm): lower gain with a rounder radiation pattern, the better choice in cities and built-up areas
• 6.6dBi long whip (680mm): higher gain with a longer, flatter radiation pattern for long, flat stretches of open road
• Easy whip changes: both whips share the one base, so you can swap to suit the trip instead of buying a second antenna
• Elevated-feed parallel spring base: slim Ø30mm stainless steel parallel spring lifts the feed point and lets the whip flex under car-park and carport clearances
• 4.5m low-loss coax cable: enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Black heat-shrink fibreglass whips: plain black wrap with a slim, low-key look

Specifications

• Model: ATEPL660-2PK
• Antenna type: on-road, elevated-feed parallel spring base with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi (short whip) or 6.6dBi (long whip)
• Whip lengths: 140mm (2.3dBi), 680mm (6.6dBi)
• Total length (including spring): 390mm with the 2.3dBi whip, 930mm with the 6.6dBi whip
• Spring: elevated stainless steel parallel spring, Ø30mm at widest point
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATEPL660 antenna base (elevated parallel spring with 4.5m coax lead)
• 1 × 2.3dBi whip (140mm)
• 1 × 6.6dBi whip (680mm)
• 1 × PL259 adapter

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXGEAR ATEBR660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads. One elevated-feed barrel spring base comes with two interchangeable whips: a short 140mm 2.3dBi whip (440mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (980mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi short whip (140mm): lower gain with a rounder radiation pattern, the better choice in cities and built-up areas
• 6.6dBi long whip (680mm): higher gain with a longer, flatter radiation pattern for long, flat stretches of open road
• Easy whip changes: both whips share the one base, so you can swap to suit the trip instead of buying a second antenna
• Elevated-feed barrel spring base: stainless steel barrel spring, Ø45mm at its widest, lifts the feed point and lets the whip flex under car-park and carport clearances
• 4.5m low-loss coax cable: enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Black heat-shrink fibreglass whips: plain black wrap with a slim, low-key look

Specifications

• Model: ATEBR660-2PK
• Antenna type: on-road, elevated-feed barrel spring base with two whips
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi (short whip) or 6.6dBi (long whip)
• Whip lengths: 140mm (2.3dBi), 680mm (6.6dBi)
• Total length (including spring): 440mm with the 2.3dBi whip, 980mm with the 6.6dBi whip
• Spring: elevated stainless steel barrel spring, Ø45mm at widest point
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATEBR660 antenna base (elevated barrel spring with 4.5m coax lead)
• 1 × 2.3dBi whip (140mm)
• 1 × 6.6dBi whip (680mm)
• 1 × PL259 adapter

Warranty: 12-month ECOXGEAR Australia warranty.

The ECOXTALK EXG200 twin pack gives you two rugged 2-watt UHF CB handhelds that are IP67 waterproof and dustproof – and they float, with the LED torch switching on automatically so a dropped radio is easy to spot in the water. With all 80 Australian UHF CB channels, up to 13km of talk range* and 16 hours of operation from the included rechargeable AA batteries, they are ready for camping, 4WD convoys, fishing, hiking, kayaking and the worksite. Hands-free VOX, a built-in LED torch, a one-touch emergency channel and USB-C charging round out a pack that also includes a twin charging dock, earpiece microphones and a soft carry case.

Key Features

• 2W output, 80 UHF CB channels: full coverage of the Australian 476.4250–477.4125 MHz UHF CB band
• IP67 waterproof, dustproof and floats: the LED torch lights up automatically when the radio lands in water
• Up to 13km talk range*: line-of-sight range for convoys, campsites and open water
• 16 hours of operation: runs on 3 × AA batteries per radio, with NiMH rechargeables included
• USB-C charging with twin dock: charge both radios at once from the mains adapter, or from the included cigarette-lead adapter in the car
• Hands-free VOX: voice-activated transmit keeps your hands on the wheel, paddle or rod
• Built-in LED torch and one-touch emergency channel
• Large backlit LCD: easy-to-read display with simple channel and volume controls
• 50 CTCSS and 104 DCS codes: plus dual watch, channel scan, auto squelch, key lock and low-battery alert
• 2.5mm accessory jack: earpiece microphones included; belt clips with large strap ring

Specifications

• Model: EXG200-2PK (black)
• RF output power: 2.0W
• Channels: 80 UHF CB
• Frequency range: 476.4250–477.4125 MHz
• Talk range: up to 13km*
• Ingress rating: IP67 (floats)
• Battery: 3 × AA NiMH rechargeable per radio (included)
• Operation time: up to 16 hours
• Charging: USB-C, twin charging dock included
• Accessory port: 2.5mm jack (earpiece/microphone)
• Dimensions: 203 × 61 × 48mm per radio
• Weight: 260g per radio

What’s in the Box

• 2 × EXG200 UHF CB handheld radios
• 2 × belt clips
• 6 × AA NiMH rechargeable batteries
• 1 × twin charging dock
• 1 × USB-C charging cable
• 1 × USB AC adapter
• 1 × USB cigarette-lead adapter
• 2 × earpiece microphones (2.5mm)
• 1 × soft carry case
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.

*Talk range varies with terrain, obstructions and conditions.

The ECOXGEAR Wired Dynamic Microphone plugs into the ¼" (6.35mm) microphone input on ECOXGEAR’s larger party speakers, turning them into a PA or karaoke system for backyard parties, school and sporting events, auctions and street performance. It is a 20cm handheld dynamic microphone on a 3m lead, so you can move around while the speaker does the work.

Suits: ECOXGEAR speakers with a ¼" (6.35mm) microphone input – the EcoBoulder Max, EcoBoulder+, EcoTrek and EcoXplorer, as well as the Defender, Defender 12V and EcoBoulder Ultra.

Key Features

• Genuine ECOXGEAR accessory: made for the ¼" microphone input on ECOXGEAR party speakers
• PA and karaoke: announcements, karaoke and speeches through your speaker
• 3m cable: room to move away from the speaker
• ¼" (6.35mm) jack: the standard microphone connector on ECOXGEAR party speakers
• Handheld dynamic microphone: 20cm long, 220g

Specifications

• Model: Wired Dynamic Microphone (GDI-EXDYMCR01)
• Type: wired dynamic, handheld
• Connector: ¼" (6.35mm) jack
• Cable length: 3.0m
• Microphone size: 200mm long × 50mm
• Weight: 220g

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

This ECOXGEAR Extreme whip kit pairs one Extreme 4ft (122cm) RGBIC LED whip with the ExtremeController 4-zone LEDCast controller, so you can run LED whip lighting on a side-by-side, ATV, 4WD or golf cart without needing a SoundExtreme Elite soundbar. Over the whip alone, the kit adds the controller, its long-range RF remote, a 2.4m SAE power cable and a 3.0m remote turn-on cable – everything needed to wire the lighting to 12V and control it from the remote or the free SoundExtreme app. The controller has four 3-pin outputs: the whip uses one zone, leaving three zones free for more LEDCast whips, strips or rock lights. The whip gives a 360-degree light show with more than 30 preset modes and sits on a quick-release magnetic mount.

Key Features

• 360-degree RGBIC light show: unlimited solid or flashing colours with over 30 preset modes, including chasing, cascading, patriot, Christmas, music and street-legal modes, plus a custom mode tool for unlimited extra modes and colours
• 4-zone LEDCast controller included: drives LEDCast-enabled SoundExtreme strips, whips and rock lights across up to four zones, each rated to 5A
• Vehicle signal integration: zones 3 and 4 can be connected to the brake, reverse and turn signals so those lights change as you drive (optional; signal extension cables not included)
• Dual control: long-range RF remote in the box, plus the free SoundExtreme smartphone app over Bluetooth Low Energy
• Millions of colours and music sync: solid, fading, jumping and chasing modes, with music light sync to any EcoCast-enabled ECOXGEAR soundbar, radio or party speaker
• App control: run each zone separately or all at once, group several controllers, create custom colours, modify the factory defaults and save favourite colours, brightness and speed
• Five custom scenes: save five lighting presets that switch every zone at once
• Remote turn-on wire: blue wire connects to the ignition, a rocker switch or an auxiliary switched panel so the lights power up with the vehicle
• Quick-release magnetic whip mount: magnets between the whip base and the socket mount hold each whip firmly and let you lift it off without tools; the socket-mount bolt needs a ½" (12.7mm) hole, and optional ExtremeWhip mounts are sold separately
• IP66 dirt and waterproof controller: industrial-grade sealed housing that mounts with the hook-and-loop self-fastener or with screws (screws not included)

Specifications

• Model: Extreme whip kit – 1 × 4ft whip with LEDCast controller (SEI-LEDZ4WHP4AU)
• LED whip: 122cm (4ft) RGBIC multi-colour whip, 360-degree display; 0.86kg (1.06kg with flag)
• Whip power draw: 2.6A maximum at 12V
• Whip connector: 3-pin signal and power connector; 1 × 3.0m LED extension cable included
• Controller outputs: 4 zones, 3-pin round female connectors, 5A maximum per zone
• Controller power input: 12V DC, 20A; 25A 32V blade fuse
• Remote turn-on input: 12–56V
• Vehicle signal inputs: brake, reverse, left and right turn (12V), zones 3 and 4 only
• Wireless: RF remote; Bluetooth 5.1 (BLE) for the SoundExtreme app; EcoCast music sync range up to 9.1m
• Controller rating: IP66
• Controller dimensions: 79mm W × 116mm H × 26mm D
• Controller weight: 0.2kg
• Cables: 2.4m SAE power cable, 3.0m remote turn-on extension cable
• Operating temperature: -5°C to 35°C

What’s in the Box

• 1 × SoundExtreme 4ft (122cm) LED whip with quick-release magnetic mount
• 1 × SoundExtreme flag
• 1 × 3.0m LED extension cable
• 1 × ExtremeController 4-zone LEDCast controller
• 1 × RF remote control
• 1 × 2.4m SAE power cable
• 1 × 3.0m remote turn-on extension cable

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

This ECOXGEAR Extreme whip kit pairs two Extreme 2ft (61cm) RGBIC LED whips with the ExtremeController 4-zone LEDCast controller, so you can run LED whip lighting on a side-by-side, ATV, 4WD or golf cart without needing a SoundExtreme Elite soundbar. Over the whips alone, the kit adds the controller, its long-range RF remote, a 2.4m SAE power cable and a 3.0m remote turn-on cable – everything needed to wire the lighting to 12V and control it from the remote or the free SoundExtreme app. The controller has four 3-pin outputs: each whip plugs into its own zone, leaving two zones free for more LEDCast whips, strips or rock lights. Each whip gives a 360-degree light show with more than 30 preset modes and sits on a quick-release magnetic mount.

Key Features

• 360-degree RGBIC light show: unlimited solid or flashing colours with over 30 preset modes, including chasing, cascading, patriot, Christmas, music and street-legal modes, plus a custom mode tool for unlimited extra modes and colours
• 4-zone LEDCast controller included: drives LEDCast-enabled SoundExtreme strips, whips and rock lights across up to four zones, each rated to 5A
• Vehicle signal integration: zones 3 and 4 can be connected to the brake, reverse and turn signals so those lights change as you drive (optional; signal extension cables not included)
• Dual control: long-range RF remote in the box, plus the free SoundExtreme smartphone app over Bluetooth Low Energy
• Millions of colours and music sync: solid, fading, jumping and chasing modes, with music light sync to any EcoCast-enabled ECOXGEAR soundbar, radio or party speaker
• App control: run each zone separately or all at once, group several controllers, create custom colours, modify the factory defaults and save favourite colours, brightness and speed
• Five custom scenes: save five lighting presets that switch every zone at once
• Remote turn-on wire: blue wire connects to the ignition, a rocker switch or an auxiliary switched panel so the lights power up with the vehicle
• Quick-release magnetic whip mount: magnets between the whip base and the socket mount hold each whip firmly and let you lift it off without tools; the socket-mount bolt needs a ½" (12.7mm) hole, and optional ExtremeWhip mounts are sold separately
• IP66 dirt and waterproof controller: industrial-grade sealed housing that mounts with the hook-and-loop self-fastener or with screws (screws not included)

Specifications

• Model: Extreme whip kit – 2 × 2ft whips with LEDCast controller (SEI-LEDZ4WHP2X2AU)
• LED whips: 2 × 61cm (2ft) RGBIC multi-colour whips, 360-degree display; 0.62kg (0.82kg with flag) each
• Whip power draw: 1.6A maximum at 12V per whip
• Whip connector: 3-pin signal and power connector; 2 × 3.0m LED extension cables included
• Controller outputs: 4 zones, 3-pin round female connectors, 5A maximum per zone
• Controller power input: 12V DC, 20A; 25A 32V blade fuse
• Remote turn-on input: 12–56V
• Vehicle signal inputs: brake, reverse, left and right turn (12V), zones 3 and 4 only
• Wireless: RF remote; Bluetooth 5.1 (BLE) for the SoundExtreme app; EcoCast music sync range up to 9.1m
• Controller rating: IP66
• Controller dimensions: 79mm W × 116mm H × 26mm D
• Controller weight: 0.2kg
• Cables: 2.4m SAE power cable, 3.0m remote turn-on extension cable
• Operating temperature: -5°C to 35°C

What’s in the Box

• 2 × SoundExtreme 2ft (61cm) LED whips with quick-release magnetic mounts
• 2 × SoundExtreme flags
• 2 × 3.0m LED extension cables
• 1 × ExtremeController 4-zone LEDCast controller
• 1 × RF remote control
• 1 × 2.4m SAE power cable
• 1 × 3.0m remote turn-on extension cable

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

This ECOXGEAR Extreme whip kit pairs one Extreme 2ft (61cm) RGBIC LED whip with the ExtremeController 4-zone LEDCast controller, so you can run LED whip lighting on a side-by-side, ATV, 4WD or golf cart without needing a SoundExtreme Elite soundbar. Over the whip alone, the kit adds the controller, its long-range RF remote, a 2.4m SAE power cable and a 3.0m remote turn-on cable – everything needed to wire the lighting to 12V and control it from the remote or the free SoundExtreme app. The controller has four 3-pin outputs: the whip uses one zone, leaving three zones free for more LEDCast whips, strips or rock lights. The whip gives a 360-degree light show with more than 30 preset modes and sits on a quick-release magnetic mount.

Key Features

• 360-degree RGBIC light show: unlimited solid or flashing colours with over 30 preset modes, including chasing, cascading, patriot, Christmas, music and street-legal modes, plus a custom mode tool for unlimited extra modes and colours
• 4-zone LEDCast controller included: drives LEDCast-enabled SoundExtreme strips, whips and rock lights across up to four zones, each rated to 5A
• Vehicle signal integration: zones 3 and 4 can be connected to the brake, reverse and turn signals so those lights change as you drive (optional; signal extension cables not included)
• Dual control: long-range RF remote in the box, plus the free SoundExtreme smartphone app over Bluetooth Low Energy
• Millions of colours and music sync: solid, fading, jumping and chasing modes, with music light sync to any EcoCast-enabled ECOXGEAR soundbar, radio or party speaker
• App control: run each zone separately or all at once, group several controllers, create custom colours, modify the factory defaults and save favourite colours, brightness and speed
• Five custom scenes: save five lighting presets that switch every zone at once
• Remote turn-on wire: blue wire connects to the ignition, a rocker switch or an auxiliary switched panel so the lights power up with the vehicle
• Quick-release magnetic whip mount: magnets between the whip base and the socket mount hold each whip firmly and let you lift it off without tools; the socket-mount bolt needs a ½" (12.7mm) hole, and optional ExtremeWhip mounts are sold separately
• IP66 dirt and waterproof controller: industrial-grade sealed housing that mounts with the hook-and-loop self-fastener or with screws (screws not included)

Specifications

• Model: Extreme whip kit – 1 × 2ft whip with LEDCast controller (SEI-LEDZ4WHP2AU)
• LED whip: 61cm (2ft) RGBIC multi-colour whip, 360-degree display; 0.62kg (0.82kg with flag)
• Whip power draw: 1.6A maximum at 12V
• Whip connector: 3-pin signal and power connector; 1 × 3.0m LED extension cable included
• Controller outputs: 4 zones, 3-pin round female connectors, 5A maximum per zone
• Controller power input: 12V DC, 20A; 25A 32V blade fuse
• Remote turn-on input: 12–56V
• Vehicle signal inputs: brake, reverse, left and right turn (12V), zones 3 and 4 only
• Wireless: RF remote; Bluetooth 5.1 (BLE) for the SoundExtreme app; EcoCast music sync range up to 9.1m
• Controller rating: IP66
• Controller dimensions: 79mm W × 116mm H × 26mm D
• Controller weight: 0.2kg
• Cables: 2.4m SAE power cable, 3.0m remote turn-on extension cable
• Operating temperature: -5°C to 35°C

What’s in the Box

• 1 × SoundExtreme 2ft (61cm) LED whip with quick-release magnetic mount
• 1 × SoundExtreme flag
• 1 × 3.0m LED extension cable
• 1 × ExtremeController 4-zone LEDCast controller
• 1 × RF remote control
• 1 × 2.4m SAE power cable
• 1 × 3.0m remote turn-on extension cable

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

The ECOXGEAR EXM600 is a 6-watt VHF marine handheld for boaters who want more reach and longer days on the water. It is IP67 waterproof and floats, with a water-activated strobe for easy retrieval, and switches between 6W, 3W and 1W output to balance talk range* against battery life. A live RSSI display shows signal strength and squelch level, a 3W internal speaker with noise-reduction circuitry keeps calls clear over engine noise, and the lithium-ion battery pack runs for up to 16 hours between charges in the included desktop cradle. It comes factory programmed with the International, USA and Canada marine channel banks plus weather channels (the International bank is the one used in Australian waters), with one-touch Channel 16 and a user-programmable priority channel.

Key Features

• 6W / 3W / 1W switchable output: up to 18.7km talk range* at full power, with lower settings to stretch battery life
• IP67 waterproof, dustproof and floats: a water-activated strobe light makes a dropped radio easy to spot, day or night
• Live RSSI active display: shows received signal strength and squelch level so you can set the squelch to suit conditions
• 3W internal speaker with noise reduction: clear audio in a noisy cockpit
• International, USA and Canada marine channels: factory programmed, with 10 weather channels and weather alert (USA and Canada bands)
• One-touch Channel 16 and programmable “P” channel: instant access to the distress and calling channel and to your own priority channel
• Up to 16 hours of operation: lithium-ion battery pack, recharged in the desktop cradle (approx. 5 hours from empty) from the AC adapter or the included cigarette-lead plug
• Scanning and watch modes: 10 memory channel scan, dual watch and triple watch
• Removable antenna, backlit LCD and keypad, built-in LED torch
• 3.5mm accessory jack: for an optional earpiece or speaker microphone; belt clip included

Specifications

• Model: EXM600
• Radio type: VHF marine handheld
• RF output power: 6W / 3W / 1W switchable
• Talk range: up to 18.7km*
• Channels: International, USA and Canada marine banks; 10 weather (WX) channels with alert (USA and Canada bands)
• Ingress rating: IP67 (floats)
• Speaker: 3W internal, noise-reduction circuit
• Display: backlit LCD with live RSSI, backlit keypad
• Battery: lithium-ion battery pack (included)
• Operation time: up to 16 hours
• Charging: desktop charging cradle with AC adapter and 12V cigarette-lead plug; approx. 5 hours from empty
• Antenna: removable
• Accessory port: 3.5mm jack (optional earpiece or speaker microphone)
• Dimensions: 276 × 63 × 50mm
• Weight: 276g

What’s in the Box

• 1 × EXM600 VHF marine handheld radio
• 1 × lithium-ion battery pack
• 1 × belt clip
• 1 × desktop charging cradle
• 1 × AC adapter
• 1 × 12V cigarette-lead plug
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.

*Talk range varies with terrain, obstructions and conditions.

The ECOXGEAR EXM300 is a compact 3-watt VHF marine handheld that is IP67 waterproof and floats – if it goes over the side, a water-activated LED strobe lights up so it is easy to spot and retrieve. It comes factory programmed with the International, USA and Canada marine channel banks plus NOAA weather channels (the International bank is the one used in Australian waters), with one-touch Channel 16 and a user-programmable priority channel, making it a handy primary radio for small boats, kayaks and tenders or a backup for larger craft. A 2W internal speaker cuts through engine and wind noise, and the radio charges over USB-C in the included desktop cradle or straight from the cable, running for up to 12 hours on the supplied AA NiMH rechargeables.

Key Features

• 3W / 1W switchable output: run full power for reach, or drop to 1W to stretch battery life on short-range calls
• IP67 waterproof, dustproof and floats: a water-activated LED strobe makes a dropped radio easy to find, day or night
• International, USA and Canada marine channels: factory programmed, with NOAA weather channels and weather alert (USA band)
• One-touch Channel 16 and programmable “P” channel: instant access to the distress and calling channel and to your own priority channel
• 2W internal speaker: clear audio in a noisy cockpit
• Up to 12 hours of operation: runs on 3 × AA NiMH 1200mAh rechargeable batteries, included
• USB-C charging: charge in the included desktop cradle or directly through the cable, with a USB AC adapter supplied
• Scanning and watch modes: 10 memory channel scan, dual watch and triple watch
• Backlit LCD and keypad, built-in LED torch
• 2.5mm accessory jack: for an optional earpiece microphone; belt clip included

Specifications

• Model: EXM300
• Radio type: VHF marine handheld
• RF output power: 3W / 1W switchable
• Channels: International, USA and Canada marine banks; NOAA weather channels with alert (USA band)
• Ingress rating: IP67 (floats)
• Speaker: 2W internal
• Display: backlit LCD with backlit keypad
• Battery: 3 × AA NiMH rechargeable, 1200mAh (included)
• Operation time: up to 12 hours
• Charging: USB-C – desktop cradle or direct cable; USB AC adapter included
• Accessory port: 2.5mm jack (optional earpiece microphone)
• Dimensions: 230 × 61 × 48mm
• Weight: 268g

What’s in the Box

• 1 × EXM300 VHF marine handheld radio
• 1 × belt clip
• 1 × desktop charging cradle
• 1 × USB-C charging cable
• 1 × USB AC adapter
• 3 × AA NiMH rechargeable batteries
• 1 × user guide

Warranty: 12-month ECOXGEAR Australia warranty, extendable to 3 years with free online product registration.