ECOXGEAR ATRD230 660mm Heavy Duty Radome UHF Antenna 2.3dBi – Black

The ECOXGEAR ATRD230 is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work, in a standard black finish (the ATRD230ST is the stealth matte version). Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a pre-terminated FME connector and PL259 adapter make fitting to a fixed-mount radio straightforward.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).

Key Features

• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Heavy-duty radome construction: fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather
• Interchangeable large barrel spring: elevated stainless steel barrel spring absorbs knocks and lets the whip flex through scrub
• 4.5m low-loss coax cable: enough length to run from a bull bar or bonnet mount to a dash-mounted radio
• Pre-terminated FME female connector with PL259 adapter: connects to a fixed-mount UHF CB radio without cutting or crimping the cable
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Swappable whip: the whip unscrews from the spring (Allen key included), so a damaged whip can be replaced without rewiring
• Black heat-shrink fibreglass finish: plain black wrap over the radome
• Weather cap and Allen key included

Specifications

• Model: ATRD230
• Antenna type: heavy-duty fibreglass radome, off-road
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length (including spring): 660mm
• Whip length: 530mm
• Spring: interchangeable large barrel-style stainless steel, elevated base
• Ferrule: aluminium
• Cable: 4.5m low-loss coax
• Connector: FME female (pre-terminated), PL259 adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATRD230 antenna (whip, spring and 4.5m coax lead)
• 1 × Allen key
• 1 × PL259 adapter
• 1 × weather cap

Warranty: 12-month ECOXGEAR Australia warranty.

Part No.: ATRD230