ECOXGEAR ATPA230 Portable Magnetic Base UHF CB Antenna 2.3dBi

The ECOXGEAR ATPA230 is a compact 2.3dBi UHF CB antenna on a strong magnetic base, so it can be put on any steel panel of a sedan, ute, 4WD or farm vehicle in seconds – no drilling, no brackets – and moved between vehicles just as easily. It stands 176mm tall, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous ground. The 3.3m low-loss coax lead is pre-terminated with an FME female connector, and both a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld are included. For best performance, mount it on the roof.

Suits: ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter) and the EXG500 handheld (FME/SMA adapter); both adapters included, radio sold separately.

Key Features

• Strong magnetic base: holds to any steel surface on the vehicle; the rooftop is recommended for the best signal
• 2.3dBi gain for hilly terrain: lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks
• Compact 176mm antenna: low enough for car parks and garages, and easy to stow when not in use
• 3.3m low-loss coax cable: enough length to route from the roof through a door seal to the radio
• Two adapters included: pre-terminated FME female connector with a PL259 adapter for fixed-mount radios and an FME/SMA adapter for the EXG500 handheld
• UHF CB 477MHz, ground-independent design: does not rely on the vehicle body as a ground plane, so mounting position is flexible
• Portable: sets up almost anywhere, so it suits work utes, farm vehicles and any car you would rather not drill

Specifications

• Model: ATPA230
• Antenna type: portable, magnetic base
• Frequency: UHF CB 477MHz, ground-independent design
• Gain: 2.3dBi
• Total length: 176mm
• Base: strong magnetic, for steel surfaces
• Cable: 3.3m low-loss coax
• Connector: FME female (pre-terminated); PL259 adapter and FME/SMA adapter included
• Finish: black heat-shrink fibreglass wrap

What’s in the Box

• 1 × ATPA230 magnetic-base antenna with 3.3m coax lead
• 1 × PL259 adapter
• 1 × FME/SMA adapter

Warranty: 12-month ECOXGEAR Australia warranty.

Part No.: ATPA230