ECOXGEAR Extreme LED Whip Kit – 2 × 2ft with 4-Zone LEDCast Controller

This ECOXGEAR Extreme whip kit pairs two Extreme 2ft (61cm) RGBIC LED whips with the ExtremeController 4-zone LEDCast controller, so you can run LED whip lighting on a side-by-side, ATV, 4WD or golf cart without needing a SoundExtreme Elite soundbar. Over the whips alone, the kit adds the controller, its long-range RF remote, a 2.4m SAE power cable and a 3.0m remote turn-on cable – everything needed to wire the lighting to 12V and control it from the remote or the free SoundExtreme app. The controller has four 3-pin outputs: each whip plugs into its own zone, leaving two zones free for more LEDCast whips, strips or rock lights. Each whip gives a 360-degree light show with more than 30 preset modes and sits on a quick-release magnetic mount.

Key Features

• 360-degree RGBIC light show: unlimited solid or flashing colours with over 30 preset modes, including chasing, cascading, patriot, Christmas, music and street-legal modes, plus a custom mode tool for unlimited extra modes and colours
• 4-zone LEDCast controller included: drives LEDCast-enabled SoundExtreme strips, whips and rock lights across up to four zones, each rated to 5A
• Vehicle signal integration: zones 3 and 4 can be connected to the brake, reverse and turn signals so those lights change as you drive (optional; signal extension cables not included)
• Dual control: long-range RF remote in the box, plus the free SoundExtreme smartphone app over Bluetooth Low Energy
• Millions of colours and music sync: solid, fading, jumping and chasing modes, with music light sync to any EcoCast-enabled ECOXGEAR soundbar, radio or party speaker
• App control: run each zone separately or all at once, group several controllers, create custom colours, modify the factory defaults and save favourite colours, brightness and speed
• Five custom scenes: save five lighting presets that switch every zone at once
• Remote turn-on wire: blue wire connects to the ignition, a rocker switch or an auxiliary switched panel so the lights power up with the vehicle
• Quick-release magnetic whip mount: magnets between the whip base and the socket mount hold each whip firmly and let you lift it off without tools; the socket-mount bolt needs a ½" (12.7mm) hole, and optional ExtremeWhip mounts are sold separately
• IP66 dirt and waterproof controller: industrial-grade sealed housing that mounts with the hook-and-loop self-fastener or with screws (screws not included)

Specifications

• Model: Extreme whip kit – 2 × 2ft whips with LEDCast controller (SEI-LEDZ4WHP2X2AU)
• LED whips: 2 × 61cm (2ft) RGBIC multi-colour whips, 360-degree display; 0.62kg (0.82kg with flag) each
• Whip power draw: 1.6A maximum at 12V per whip
• Whip connector: 3-pin signal and power connector; 2 × 3.0m LED extension cables included
• Controller outputs: 4 zones, 3-pin round female connectors, 5A maximum per zone
• Controller power input: 12V DC, 20A; 25A 32V blade fuse
• Remote turn-on input: 12–56V
• Vehicle signal inputs: brake, reverse, left and right turn (12V), zones 3 and 4 only
• Wireless: RF remote; Bluetooth 5.1 (BLE) for the SoundExtreme app; EcoCast music sync range up to 9.1m
• Controller rating: IP66
• Controller dimensions: 79mm W × 116mm H × 26mm D
• Controller weight: 0.2kg
• Cables: 2.4m SAE power cable, 3.0m remote turn-on extension cable
• Operating temperature: -5°C to 35°C

What’s in the Box

• 2 × SoundExtreme 2ft (61cm) LED whips with quick-release magnetic mounts
• 2 × SoundExtreme flags
• 2 × 3.0m LED extension cables
• 1 × ExtremeController 4-zone LEDCast controller
• 1 × RF remote control
• 1 × 2.4m SAE power cable
• 1 × 3.0m remote turn-on extension cable

Warranty: Backed by ECOXGEAR Australia's manufacturer warranty.

Part No.: SEI-LEDZ4WHP2X2AU