{"title":"Antennas","description":null,"products":[{"product_id":"ecox-uhf-antenna-barrel","title":"ECOXGEAR ATEBR660-2PK On-Road UHF Antenna Twin Whip Pack – Barrel Spring","description":"\u003cp\u003eThe ECOXGEAR ATEBR660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads. One elevated-feed barrel spring base comes with two interchangeable whips: a short 140mm 2.3dBi whip (440mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (980mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi short whip (140mm):\u003c\/strong\u003e lower gain with a rounder radiation pattern, the better choice in cities and built-up areas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi long whip (680mm):\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for long, flat stretches of open road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy whip changes:\u003c\/strong\u003e both whips share the one base, so you can swap to suit the trip instead of buying a second antenna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElevated-feed barrel spring base:\u003c\/strong\u003e stainless steel barrel spring, Ø45mm at its widest, lifts the feed point and lets the whip flex under car-park and carport clearances\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack heat-shrink fibreglass whips:\u003c\/strong\u003e plain black wrap with a slim, low-key look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATEBR660-2PK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e on-road, elevated-feed barrel spring base with two whips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi (short whip) or 6.6dBi (long whip)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip lengths:\u003c\/strong\u003e 140mm (2.3dBi), 680mm (6.6dBi)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 440mm with the 2.3dBi whip, 980mm with the 6.6dBi whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e elevated stainless steel barrel spring, Ø45mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black heat-shrink fibreglass wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATEBR660 antenna base (elevated barrel spring with 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × 2.3dBi whip (140mm)\u003c\/li\u003e\n  \u003cli\u003e1 × 6.6dBi whip (680mm)\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087409378,"sku":"ECXATEBR6602","price":127.63,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATEBR6602_d42c8d06-e35c-419d-bd77-806b0e5940f5.jpg?v=1755398736"},{"product_id":"ecox-uhf-antenna-parrallel","title":"ECOXGEAR ATEPL660-2PK On-Road UHF Antenna Twin Whip Pack – Parallel Spring","description":"\u003cp\u003eThe ECOXGEAR ATEPL660-2PK is an on-road UHF CB antenna kit for cars, utes and 4WDs that spend most of their time on sealed roads, built around a slim elevated-feed parallel spring base – at Ø30mm it is the lower-profile of the two ECOXGEAR on-road kits (the ATEBR660-2PK uses a Ø45mm barrel spring). It comes with two interchangeable whips: a short 140mm 2.3dBi whip (390mm overall) whose rounder radiation pattern suits cities and built-up areas, and a 680mm 6.6dBi whip (930mm overall) with a longer, flatter pattern for long, flat highway runs. The 4.5m low-loss coax lead is pre-terminated with an FME female connector and a PL259 adapter is included, so it connects straight to a fixed-mount radio.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi short whip (140mm):\u003c\/strong\u003e lower gain with a rounder radiation pattern, the better choice in cities and built-up areas\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi long whip (680mm):\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for long, flat stretches of open road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy whip changes:\u003c\/strong\u003e both whips share the one base, so you can swap to suit the trip instead of buying a second antenna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElevated-feed parallel spring base:\u003c\/strong\u003e slim Ø30mm stainless steel parallel spring lifts the feed point and lets the whip flex under car-park and carport clearances\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e enough length to run from a bull bar, bonnet or gutter mount to a dash-mounted radio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack heat-shrink fibreglass whips:\u003c\/strong\u003e plain black wrap with a slim, low-key look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATEPL660-2PK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e on-road, elevated-feed parallel spring base with two whips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi (short whip) or 6.6dBi (long whip)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip lengths:\u003c\/strong\u003e 140mm (2.3dBi), 680mm (6.6dBi)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 390mm with the 2.3dBi whip, 930mm with the 6.6dBi whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e elevated stainless steel parallel spring, Ø30mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black heat-shrink fibreglass wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATEPL660 antenna base (elevated parallel spring with 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × 2.3dBi whip (140mm)\u003c\/li\u003e\n  \u003cli\u003e1 × 6.6dBi whip (680mm)\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087442146,"sku":"ECXATEPL6602","price":102.26,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATEPL6602_c95ce777-55f2-48c2-9129-5a46641bf75c.jpg?v=1755398742"},{"product_id":"ecox-uhf-antenna-portable","title":"ECOXGEAR ATPA230 Portable Magnetic Base UHF CB Antenna 2.3dBi","description":"\u003cp\u003eThe ECOXGEAR ATPA230 is a compact 2.3dBi UHF CB antenna on a strong magnetic base, so it can be put on any steel panel of a sedan, ute, 4WD or farm vehicle in seconds – no drilling, no brackets – and moved between vehicles just as easily. It stands 176mm tall, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous ground. The 3.3m low-loss coax lead is pre-terminated with an FME female connector, and both a PL259 adapter for fixed-mount radios and an FME\/SMA adapter for the EXG500 handheld are included. For best performance, mount it on the roof.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter) and the EXG500 handheld (FME\/SMA adapter); both adapters included, radio sold separately.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrong magnetic base:\u003c\/strong\u003e holds to any steel surface on the vehicle; the rooftop is recommended for the best signal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompact 176mm antenna:\u003c\/strong\u003e low enough for car parks and garages, and easy to stow when not in use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3.3m low-loss coax cable:\u003c\/strong\u003e enough length to route from the roof through a door seal to the radio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo adapters included:\u003c\/strong\u003e pre-terminated FME female connector with a PL259 adapter for fixed-mount radios and an FME\/SMA adapter for the EXG500 handheld\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePortable:\u003c\/strong\u003e sets up almost anywhere, so it suits work utes, farm vehicles and any car you would rather not drill\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATPA230\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e portable, magnetic base\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length:\u003c\/strong\u003e 176mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e strong magnetic, for steel surfaces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 3.3m low-loss coax\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated); PL259 adapter and FME\/SMA adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black heat-shrink fibreglass wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATPA230 magnetic-base antenna with 3.3m coax lead\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × FME\/SMA adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087737058,"sku":"ECXATPA230","price":65.44,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATPA230_f2c3753d-99ec-4ec3-bb5b-b5d5f1b5e344.jpg?v=1755398746"},{"product_id":"ecox-uhf-antenna-raydome-2-3","title":"ECOXGEAR ATRD230 660mm Heavy Duty Radome UHF Antenna 2.3dBi – Black","description":"\u003cp\u003eThe ECOXGEAR ATRD230 is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work, in a standard black finish (the ATRD230ST is the stealth matte version). Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a pre-terminated FME connector and PL259 adapter make fitting to a fixed-mount radio straightforward.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable large barrel spring:\u003c\/strong\u003e elevated stainless steel barrel spring absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e enough length to run from a bull bar or bonnet mount to a dash-mounted radio\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwappable whip:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so a damaged whip can be replaced without rewiring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack heat-shrink fibreglass finish:\u003c\/strong\u003e plain black wrap over the radome\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eWeather cap and Allen key included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRD230\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e heavy-duty fibreglass radome, off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 660mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip length:\u003c\/strong\u003e 530mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable large barrel-style stainless steel, elevated base\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e black heat-shrink fibreglass wrap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRD230 antenna (whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087769826,"sku":"ECXATRD230","price":206.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATRD230_3a4828dd-c9a9-4634-88e9-58376ea278fd.jpg?v=1755398751"},{"product_id":"ecox-uhf-hd-antenna-radome-2-3","title":"ECOXGEAR ATRD230ST 660mm Heavy Duty Radome UHF Antenna 2.3dBi – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRD230ST is a heavy-duty 2.3dBi UHF CB antenna built for 4WD touring and off-road work. Its 530mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 660mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable large barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwappable whip:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can fit the 6.6dBi WPRD660ST whip for open country or replace a damaged whip with a WPRD230ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRD230ST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e heavy-duty fibreglass radome, off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 660mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip length:\u003c\/strong\u003e 530mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRD230ST antenna (whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087835362,"sku":"ECXATRD230ST","price":245.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATRD230ST_fc7491ae-f3c2-46a5-b268-76154c174023.jpg?v=1755398756"},{"product_id":"ecox-uhf-hd-antenna-radome-6-6","title":"ECOXGEAR ATRD660ST 1180mm Heavy Duty Radome UHF Antenna 6.6dBi – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRD660ST is a heavy-duty 6.6dBi UHF CB antenna for 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. The 1048mm fibreglass radome whip sits on an interchangeable large barrel-style stainless steel spring for a total length of 1180mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi gain for open country:\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable large barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwappable whip:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRD230ST whip for hilly country or replace a damaged whip with a WPRD660ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRD660ST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e heavy-duty fibreglass radome, off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 6.6dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 1180mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip length:\u003c\/strong\u003e 1048mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRD660ST antenna (whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087868130,"sku":"ECXATRD660ST","price":294.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATRD660ST_1bbba128-bdfa-4dac-ac7d-3ae4db153ca9.jpg?v=1755398761"},{"product_id":"ecox-uhf-md-antenna-radome-2-3","title":"ECOXGEAR ATRDM230ST 613mm Medium Duty Radome UHF Antenna 2.3dBi – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRDM230ST is a medium-duty 2.3dBi UHF CB antenna for overlanding and 4WD touring – a slimmer alternative to the heavy-duty ATRD series, with a smaller Ø45mm spring and a shorter whip. Its 500mm fibreglass radome whip sits on an interchangeable medium barrel-style stainless steel spring for a total length of 613mm, and the lower 2.3dBi gain gives a rounder radiation pattern that holds signal on hilly and mountainous tracks. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable medium barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwappable whip:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can fit the 6.6dBi WPRDM660ST whip for open country or replace a damaged whip with a WPRDM230ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRDM230ST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e medium-duty fibreglass radome, overlanding and off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 2.3dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 613mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip length:\u003c\/strong\u003e 500mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRDM230ST antenna (whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087900898,"sku":"ECXATRDM230ST","price":196.36,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATRDM230ST_0b9240d9-28f9-470b-b3f6-eb78da421b3c.jpg?v=1755398766"},{"product_id":"ecox-uhf-md-antenna-radome-6-6","title":"ECOXGEAR ATRDM660ST 994mm Medium Duty Radome UHF Antenna 6.6dBi – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRDM660ST is a medium-duty 6.6dBi UHF CB antenna for overlanding and 4WD touring across flat, open country, where its longer, flatter radiation pattern gives the extra reach that a short whip cannot. It is a slimmer alternative to the heavy-duty ATRD series, with a smaller Ø45mm spring and a shorter whip: the 880mm fibreglass radome whip sits on an interchangeable medium barrel-style stainless steel spring for a total length of 994mm. A 4.5m low-loss coax lead with a flexible, UV-resistant TPE jacket and a pre-terminated FME connector with PL259 adapter make fitting straightforward, while the stealth matte finish keeps glare down when driving at night.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi gain for open country:\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable medium barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwappable whip:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can fit the shorter 2.3dBi WPRDM230ST whip for hilly country or replace a damaged whip with a WPRDM660ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRDM660ST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e medium-duty fibreglass radome, overlanding and off-road\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 6.6dBi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 994mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip length:\u003c\/strong\u003e 880mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRDM660ST antenna (whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":46771087933666,"sku":"ECXATRDM660ST","price":245.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/ECXATRDM660ST_2c7869e1-2821-4a4c-945c-21402f11e153.jpg?v=1755398771"},{"product_id":"ecoxgear-atrdm660st-2pk-md-radome-antenna-2pk","title":"ECOXGEAR ATRDM660ST-2PK Medium Duty Radome UHF Antenna Twin Whip Pack – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRDM660ST-2PK pairs the medium-duty ATRDM660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 880mm 6.6dBi whip (994mm overall) for long reach across flat, open terrain, and swap to the 500mm 2.3dBi whip (613mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable medium barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRDM660ST – a slimmer alternative to the heavy-duty ATRD pack – and both whips carry the low-glare stealth matte finish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo whips, one antenna:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi gain for open country:\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedium-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather, in a slimmer package than the heavy-duty ATRD series\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable medium barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø45mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRDM660ST-2PK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e medium-duty fibreglass radome, overlanding and off-road, with two whips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 6.6dBi (long whip) or 2.3dBi (short whip)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip lengths:\u003c\/strong\u003e 880mm (6.6dBi), 500mm (2.3dBi)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 994mm with the 6.6dBi whip, 613mm with the 2.3dBi whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable medium barrel-style stainless steel, matte coated, Ø45mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRDM660ST antenna (6.6dBi whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × 2.3dBi medium-duty radome whip (500mm)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":48470623748322,"sku":"ECXATRDM660ST2PK","price":324.54,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/01-atrdm660st-1.jpg?v=1790546608"},{"product_id":"ecoxgear-atrd660st-2pk-hd-radome-antenna-2pk","title":"ECOXGEAR ATRD660ST-2PK Heavy Duty Radome UHF Antenna Twin Whip Pack – Stealth Matte","description":"\u003cp\u003eThe ECOXGEAR ATRD660ST-2PK pairs the heavy-duty ATRD660ST stealth matte radome antenna with a second, shorter 2.3dBi whip, so one antenna covers both kinds of country. Fit the 1048mm 6.6dBi whip (1180mm overall) for long reach across flat, open terrain, and swap to the 530mm 2.3dBi whip (660mm overall) when the track turns hilly or mountainous and a rounder radiation pattern holds the signal better. The interchangeable large barrel-style stainless steel spring, aluminium ferrule, 4.5m TPE-jacketed low-loss coax and pre-terminated FME connector with PL259 adapter are the same as the single ATRD660ST, and both whips carry the low-glare stealth matte finish.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuits:\u003c\/strong\u003e ECOXGEAR ECOXTALK EXG1000 and EXG3000 fixed-mount UHF CB radios (PL259 adapter included; radio sold separately).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo whips, one antenna:\u003c\/strong\u003e the whip unscrews from the spring (Allen key included), so you can change gain to suit the terrain instead of carrying a second antenna\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.6dBi gain for open country:\u003c\/strong\u003e higher gain with a longer, flatter radiation pattern for extra reach across flat, open terrain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.3dBi gain for hilly terrain:\u003c\/strong\u003e lower gain with a rounder radiation pattern, so the signal holds up on undulating, hilly and mountainous off-road tracks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty radome construction:\u003c\/strong\u003e fibreglass radome whip with an aluminium ferrule protects the antenna element from scrub, stone strikes and weather\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterchangeable large barrel spring:\u003c\/strong\u003e matte-coated stainless steel spring, Ø55mm at its widest, absorbs knocks and lets the whip flex through scrub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStealth matte finish:\u003c\/strong\u003e low sheen for diffused reflectivity under night lighting, so there is less glare from headlights and campsite lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.5m low-loss coax cable:\u003c\/strong\u003e TPE jacket for flexibility, UV resistance and abrasion protection on the run through the engine bay or A-pillar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-terminated FME female connector with PL259 adapter:\u003c\/strong\u003e connects to a fixed-mount UHF CB radio without cutting or crimping the cable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30mm mount thread:\u003c\/strong\u003e longer thread for a more secure fit in most bull bar and bonnet mounting brackets\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF CB 477MHz, ground-independent design:\u003c\/strong\u003e does not rely on the vehicle body as a ground plane, so mounting position is flexible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ATRD660ST-2PK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAntenna type:\u003c\/strong\u003e heavy-duty fibreglass radome, off-road, with two whips\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e UHF CB 477MHz, ground-independent design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 6.6dBi (long whip) or 2.3dBi (short whip)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhip lengths:\u003c\/strong\u003e 1048mm (6.6dBi), 530mm (2.3dBi)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal length (including spring):\u003c\/strong\u003e 1180mm with the 6.6dBi whip, 660mm with the 2.3dBi whip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring:\u003c\/strong\u003e interchangeable large barrel-style stainless steel, matte coated, Ø55mm at widest point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFerrule:\u003c\/strong\u003e aluminium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 4.5m low-loss coax, TPE jacket\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e FME female (pre-terminated), PL259 adapter included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount thread length:\u003c\/strong\u003e 30mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e stealth matte black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × ATRD660ST antenna (6.6dBi whip, spring and 4.5m coax lead)\u003c\/li\u003e\n  \u003cli\u003e1 × 2.3dBi heavy-duty radome whip (530mm)\u003c\/li\u003e\n  \u003cli\u003e1 × Allen key\u003c\/li\u003e\n  \u003cli\u003e1 × PL259 adapter\u003c\/li\u003e\n  \u003cli\u003e1 × embossed weather cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month ECOXGEAR Australia warranty.\u003c\/p\u003e","brand":"EcoXgear","offers":[{"title":"Default Title","offer_id":48470623813858,"sku":"ECXATRD660ST2PK","price":435.82,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/1778\/4911\/files\/01-atrd660st-1_0dec3765-03e8-45ea-afc6-69ae935cd189.jpg?v=1790546399"}],"url":"https:\/\/soundzstore.com.au\/collections\/antennas.oembed","provider":"Soundz Store AUSTRALIA","version":"1.0","type":"link"}